Test (100)

• % < 0.5 microns - L5M
• % < 1 micron - L1M
• % < 10 microns - L10M
• % < 2 microns - L2M
• % < 20 microns - L20M
• % < 30 microns - L30M
• % < 5 microns - L5
• % Passing 200 Mesh Wet - P200
• % Passing 325 Mesh Wet - P325
• +44 and +63 Micron Residue - 44MR
• 300F:Ice Water Crazing Test - IWCT
• Apparent Porosity - APPO
• Apparent Viscosity (cps) - AVSC
• Average Particle Size (Microns) - AVPS
• Boiling Water:Ice Water Glaze Fit Test - BWIW
• Borate LOI - BLOI
• Bulk Density g/cc (Packed) - BDGC
• Bulk Density lbs/cu. ft. (Packed) - BDLB
• Carbon content - CCON
• CEC (meq/100g) - CEC
• Clay Water Content - Powder, Plastic - CLWC
• Clay, Silt, Sand Sedimentation Test - CSSS
• Co-efficient of Linear Expansion - COLE
• Cold Over Boiled Porosity - COVB
• Compressive Strength - CMST
• Decomposition Temperature - DTMP
• Deflocculation Demand - DFDM
• Density (Specific Gravity) - DENS
• Density, loose packed (lbs/cu fut) - DNLP
• Dielectric Strength - DIEL
• Dry M.O.R. (50% Silica) - MOR5
• Dry Strength (kgf/cm2) - DS
• Dry Strength (Square Bars) - DSTR
• Dry Strenth (Round Bars) - DSRN
• Drying Factor - DFAC
• Drying Factor/Water Content/Solubles - CDRY
• Drying Shrinkage - DSHR
• Elastic Modulus, 20 degrees C - EM20
• Engobe Body Compatibility Test - EBCT
• Fired Strength Round Bars - FRRD
• Fired Strength Square Bars - FSTR
• Firing Shrinkage - FSHR
• Fracture Toughness - FRTG
• Frit Fusibility Test - FRFU
• Frit Melting Range (C) - MLRG
• Frit Softening Point - GSPT
• GE Brightness - GEBR
• Glass Transition Temperature - GTTM
• Glaze Body Bond Test - GBBT
• Glaze Hardness - GLHD
• Glaze Leaching Test - GLLE
• Glaze Melt Flow - Runway Test - GLFL
• Glaze Melt Fluidity - Ball Test - GBMF
• Glaze Observations - GLAZ
• Hardness (Microindentation) Test - HDMI
• Hardness (Moh) - HMOH
• Heating Microscope Analysis - HMAN
• Heating Microscope Analysis for Frits - HMA
• Hegman Fineness - HEGF
• I.F.P. (celsius) - IFP
• Index of Refraction - XREF
• Lab tests for traditional ceramic bodies, glazes, processes
• Liquid Limit - LQLM
• LOI (100-1000C) - LOI
• LOI/Density/Water Content - LDW
• Median Particle Size (Microns) - MDPS
• Modulus of Rupture - Dry - MORD
• Modulus of Rupture - Fired - MOR
• Moisture Content - Powder - MOIP
• Oil Adsorption (Spatula) - OLAD
• Particle Shape (1-7 microns) - PSHP
• pH (pugged clay) - pHPG
• pH for dry powder - pHPW
• Poisson's Ratio - PRSM
• Pugged Body Properties Overview - PBPO
• Pyrometric Cone Equivalent - PCE
• Pyroplastic Deformation - PPD
• Reheat Change - RC
• Rheology of a Ceramic Slurry - RHEO
• Shrinkage/Absorption Test - SHAB
• Sieve Analysis 35-325 Wet - SIEV
• Sieve Analysis Dry - SADR
• Sieve Analysis Wet - SVWT
• Simple Clay Evaluation - SCLE
• Simple Shrinkage/Absorption - SSAB
• Solubility - SLBY
• Soluble Salts - SOLU
• Specific Heat Capacity - SPHC
• Surface Area (m2/gm) - SAMG
• Tensile Strength, 25 degrees C - TNST
• TGA - TGA
• Thermal Conductivity, 20 degrees C - THCO
• Thermal Shock Failure - TSFL
• Trace Elements (ppm) - TREL
• Trace Minerals - TRMN
• Ultimate Particle Size Distribution - UPSD
• Water absorption - WABS
• Water of Plasticity - WOPL
• Wet Sieve Residue - WSR
• Whole Rock Analysis - WRA